Drilling Simulator for iPhone – Introductory Level submitted for iTunes App Store

Drilling Simulator for iPhone – Introductory Level

iDrillSim_10_01.PNG

Awaiting approval by Apple.

Drilling Simulator – Introductory level provides a graphical very useful tool for training of roughnecks, derrickmen, drillers and students in basic drilling concepts and in the kick detection based on the behavior of the parameters during the drilling an oil well and of the behavior of kick in the well after the shut-in the well.

– Drilling (bit rotation, geolograph, neutral point);

– Hydraulics;

– Kick Detection;

– Hard Shut-in;

– Behavior of kick;

Note: This app NOT allows to control the well after the kick detection and shut-in.

The simulation ends after the simulations of underground blowout and blowout to surface.

iDrillSim_10_02.PNG iDrillSim_10_03.PNG
 iDrillSim_10_04.PNG iDrillSim_10_05.PNG
 iDrillSim_10_06.PNG  iDrillSim_10_07.PNG
 iDrillSim_10_08A.PNG  iDrillSim_10_08B.PNG
 iDrillSim_10_09A.PNG  iDrillSim_10_09B.PNG

Features: 

1) Panel with the following parameters: pump pressure, mud pump speed, strokes totalizer, flow rate, mud weight, bit depth, rotary speed, hookload and weight on the bit;

2) Instruments with pointers to the parameters: pump pressure, hookload and weight on the bit;

3) Geolograph with parameters: drillpipe pressure, choke pressure, active volume, percent of flow, rotary torque, drilling rate and flow in, flow out.

4) Panel with alarms: pump failure, vol high, flow high, bop failure and bop status;

5) Well Config, Circulation Options, Set Alarms, Graph Limits, X-times faster, Pause/Continue, Restart, Send by email, about and Hydraulics;

6) set drillstring with drillpipe, heavy-weight and drillcollar;

7) Select floating rig or land rig;

8) Select unit systems: International, field1 (imperial) and field2 (mix);

9) set fluid parameters: mud weight, plastic viscosity, yield point and initial gel;

10) Select rheological models: Power or Bingham;

11) Set gradients: fracture and temperature;

12) Set jet nozzles or fixed TFA;

13) Set choke parameters and BOP test pressure;

14) Set Surface circulation volume;

15) Set surface circulation equipments (mud pump and lines);

16) Set four formations to drilling (height, pore gradient, fluid density and sof/hard);

17) Save configuration to data files;

18) Select circulation options: drillpipe -> Riser, Kill -> Riser, Close/Open (Hard shut-in) the well;

19) Set alarms: pit gain, flow rate out, max pump pressure and max pump power;

20) Register the kill line losses and pump pressure at the kill speed;

21) show the well with drillstring and neutrl point and show the drillbit on rotating;

22) Show schematic of well with drillstring, kick and neutral point (%);

23) Adjust pump speed, weight on the bit and rotary speed to drilling until kick detection;

24) Shut-in the well using hard method;

25) Register shut-in drillpipe pressure (SIDPP) and choke pressure (SICP) and gain volume;

26) behavior of the kick: keeping the well closed and keeping the well opened;

27) Simulations: Underground Blowout at casing shoe and blowout with failure of bop;

28) Capacities and Volumes calculations;

29) Hydrostatic and critical pressures calculations;

30) Hydraulics calculations;

wellcontrol_url.png

contact@wellcontrol.com.br

www.wellcontrol.com.br

 

 

 

 

Drilling Simulator for iPad – Introductory level now available on the iTunes App Store

Drilling Simulator for iPad – Introductory level

This App provides a graphical very useful tool for training of roughnecks, derrickmen, drillers and students in basics drilling concepts and in the kick detection based on the behavior of the parameters during the drilling an oil well and of the behavior of kick in the well after the shut-in the well.

DrillSim_170x170_75.png

Link to iTunes App Store:  http://itunes.apple.com/us/app/drilling-simulator-introductory/id436659920?mt=8&ls=1

Features:

1) Panel with the following parameters: pump pressure, mud pump speed, strokes totalizer, flow rate, mud weight, bit depth, rotary speed, hookload and weight on the bit;
2) Instruments with pointers to the parameters: pump pressure, hookload, weight on the bit and rotary torque;
3) Geolograph with parameters: drillpipe pressure, choke pressure, active volume, hookload, weight on the bit, length drilled, flow in, flow out, percent of flow, rotary torque, rotary speed and drilling rate.
4) Panel with alarms: pump failure, vol high, flow high, bop failure, bop status and choke status;
5) Toolbar with buttons: Well Config, Circulation Options, Set Alarms, Graph Limits, X-times faster, Pause/Continue, Restart, Send by email, about;
6) set drillstring with drillpipe, heavy-weight and drillcollar;
7) Select floating rig or land rig;
8) Select unit systems: International, field1 (imperial) and field2 (mix);
9) set fluid parameters: mud weight, plastic viscosity, yield point and initial gel;
10) Select rheological models: Power or Bingham;
11) Set gradients: fracture and temperature;
12) Set jet nozzles or fixed TFA;
13) Set choke parameters and BOP test pressure;
14) Set Surface circulation volume;
15) Set surface circulation equipments (mud pump and lines);
16) Set four formations to drilling (height, pore gradient, fluid density and sof/hard);
17) Save configuration to data files;
18) Select circulation options: drillpipe -> Riser, Kill -> Riser, Close/Open (Hard shut-in) the well;
19) Set alarms: pit gain, flow rate out, max pump pressure and max pump power;
20) Register the kill line losses and pump pressure at the kill speed;
21) show the well with drillstring and the drillbit on rotating;
22) Show schematic of well with drillstring, kick and neutral point (%);
23) Adjust pump speed, weight on the bit and rotary speed to drilling until kick detection;
24) Shut-in the well using hard method;
25) Register shut-in drillpipe pressure (SIDPP) and choke pressure (SICP) and gain volume;
26) behavior of the kick: keeping the well closed and keeping the well opened;
27) Simulations: Underground Blowout at casing shoe and blowout with failure of bop;
28) Capacities and Volumes calculations;
29) Hydrostatic and critical pressures calculations;
30) Hydraulics calculations;
Note: This Drilling Simulator NOT allows to control the well after the kick detection and shut-in. The simulation ends after the simulations of underground blowout and blowout to surface.

Screenshots:

DRILLSIM1_01.PNG
DRILLSIM1_03.PNG
DRILLSIM1_04.PNG
DRILLSIM1_05.PNG
DRILLSIM1_02.PNG

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

Drilling Simulator for iPad – Introductory level, submitted for iTunes App Store

Drilling Simulator for iPad – Introductory level

This App provides a graphical very useful tool for training of roughnecks, derrickmen, drillers and students in basics drilling concepts and in the kick detection based on the behavior of the parameters during the drilling an oil well and of the behavior of kick in the well after the shut-in the well.

We are awaiting for approval by Apple.

DrillSim_170x170_75.png

Features:

1) Panel with the following parameters: pump pressure, mud pump speed, strokes totalizer, flow rate, mud weight, bit depth, rotary speed, hookload and weight on the bit;
2) Instruments with pointers to the parameters: pump pressure, hookload, weight on the bit and rotary torque;
3) Geolograph with parameters: drillpipe pressure, choke pressure, active volume, hookload, weight on the bit, length drilled, flow in, flow out, percent of flow, rotary torque, rotary speed and drilling rate.
4) Panel with alarms: pump failure, vol high, flow high, bop failure, bop status and choke status;
5) Toolbar with buttons: Well Config, Circulation Options, Set Alarms, Graph Limits, X-times faster, Pause/Continue, Restart, Send by email, about;
6) set drillstring with drillpipe, heavy-weight and drillcollar;
7) Select floating rig or land rig;
8) Select unit systems: International, field1 (imperial) and field2 (mix);
9) set fluid parameters: mud weight, plastic viscosity, yield point and initial gel;
10) Select rheological models: Power or Bingham;
11) Set gradients: fracture and temperature;
12) Set jet nozzles or fixed TFA;
13) Set choke parameters and BOP test pressure;
14) Set Surface circulation volume;
15) Set surface circulation equipments (mud pump and lines);
16) Set four formations to drilling (height, pore gradient, fluid density and sof/hard);
17) Save configuration to data files;
18) Select circulation options: drillpipe -> Riser, Kill -> Riser, Close/Open (Hard shut-in) the well;
19) Set alarms: pit gain, flow rate out, max pump pressure and max pump power;
20) Register the kill line losses and pump pressure at the kill speed;
21) show the well with drillstring and the drillbit on rotating;
22) Show schematic of well with drillstring, kick and neutral point (%);
23) Adjust pump speed, weight on the bit and rotary speed to drilling until kick detection;
24) Shut-in the well using hard method;
25) Register shut-in drillpipe pressure (SIDPP) and choke pressure (SICP) and gain volume;
26) behavior of the kick: keeping the well closed and keeping the well opened;
27) Simulations: Underground Blowout at casing shoe and blowout with failure of bop;
28) Capacities and Volumes calculations;
29) Hydrostatic and critical pressures calculations;
30) Hydraulics calculations;

Note: This Drilling Simulator NOT allows to control the well after the kick detection and shut-in. The simulation ends after the simulations of underground blowout and blowout to surface.

Screenshots:

 DRILLSIM1_01.PNG
DRILLSIM1_03.PNG
DRILLSIM1_04.PNG
 DRILLSIM1_05.PNG
DRILLSIM1_02.PNG

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

Directional Drilling Survey for iPad, release 1.2, now available on iTunes App Store

Directional Drilling Survey for iPad, release 1.2

DDS_170x170_75.png

Visit: www.wellcontrol.com.br

New feature: Include button and View to edit the Tie-In.

DDS2_12.PNG

Description

The Directional Drilling Survey provides the control of directional drilling of oil wells with calculations and plotting of project data and survey data in vertical and plan views to help technicians, drillers, toolspushers and engineers of petroleum industry.

Features:
1. Well Project Definition;
2. Ability to work with multiple data files;
3. Directional Survey: Edit, Add, Insert and Remove Survey Data;
4. Calculations Methods:
– Tangential
– Balanced Tangential
– Minimum Curvature
– Radius of Curvature
– Angle Averaging
5. Projections in vertical view and plan view;
6. Ability to print and to send reports by email;
7. Survey Data Calculations in all methods
simultaneously;
8. Formulas of Methods;
9. Ability to work with length units: foot and meter;
10. Vertical Section View in portrait and Plan View in landscape.

Screenshots:

Directional_Drilling_Survey.png
DDS_02.PNG
DDS_02B.PNG
DDS_03A.PNG
DDS_03B.PNG

 contact@wellcontrol.com.br

www.wellcontrol.com.br

Update for Directional Drilling Survey LITE, release 1.1, now available on iTunes App Store

Directional Drilling Survey LITE for iPhone, iPod Touch and iPad

The Directional Drilling Survey LITE provides the understanding of directional drilling of oil wells with calculations and plotting of well planning and survey data in vertical and plan views to help technicians, drillers, toolspushers and engineers of petroleum industry.

This is a limited version methods tangential and balanced tangential and contains iAd. It is very useful for understanding of the concepts of directional drilling.

The full version is completely interactive and allows users to select methods tangential, Balanced Tangential, Minimum Curvature, Radius of Curvature and Angle Averaging, save survey data to files, view formulas of methods, buttons to Edit/Save and Insert survey data, send by email, print and no contains iAd.

Features:
1. Default Well Planning;
2. Survey Data: Add and Remove Data to Plotting;
3. Calculations Methods:
– Tangential
– Balanced Tangential
4. Projections in vertical view and plan view;
5. Survey Data Calculations to methods tangential and balanced tangential
simultaneously;
6. Ability to work with length units: foot and meter;
7. Vertical Section View in portrait
and Plan View in landscape.

DDS_170x170_75.png

visit: www.wellcontrol.com.br

LITE VERSION 1.1 

 iPhone and iPod Touch  iPad
DS_05L.PNG DDS_04L.PNG
DS1_03L.PNG  DDS2_02L.PNG

 FULL VERSION 1.2

visit  www.wellcontrol.com.br for more details.

 iPhone and iPod Touch  iPad
iDirectional_05.PNG DDS_03A.PNG
iDirectional_03.PNG  DDS_02.PNG

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

Drilling Simulator – Introductory level, a new app for iPad coming soon

Drilling Simulator – Introductory level for iPad Provides a graphical very useful tool for training of roughnecks, derrickmen and drillers in basics drilling concepts and in the kick detection based on the behavior of the parameters during the drilling an oil well.

The simulation ends after the closing of the well after the detection of the kick.

DrillSim1_01.PNG

contact@wellcontrol.com.br

http://www.wellcontrol.com.br

Update for Directional Drilling Survey for iPhone and iPod Touch, release 1.2, submitted to iTunes App Store

Directional Drilling Survey for iPhone and iPod Touch

DDS_170x170_75.png

LInk to Itunes App Store: http://itunes.apple.com/us/app/directional-survey/id426750066?mt=8&ls=1 

New feature: Include View to edit the Tie-In.

 DS1_12_02.PNG DS1_12_06.PNG

The Directional Drilling Survey provides the control of directional drilling of oil wells with calculations and plotting of well planning data and survey data in vertical and plan views to help technicians, drillers, toolspushers and engineers of petroleum industry.

Features:
1. Well Planning Definition;
2. Ability to work with multiple data files;
3. Directional Survey: Edit, Add, Insert and Remove Survey Data;
4. Calculations Methods:
– Tangential
– Balanced Tangential
– Minimum Curvature
– Radius of Curvature
– Angle Averaging
5. Projections in vertical view and plan view;
6. Ability to send reports by email;
7. Survey Data Calculations in all methods
simultaneously;
8. Formulas of Methods;
9. Ability to work with length units: foot and meter;
10. Vertical Section View in portrait
and Plan View in landscape.

SCREENSHOTS:

iDirectional_01.PNG iDirectional_02.PNG
iDirectional_03.PNG iDirectional_04.PNG
iDirectional_05.PNG iDirectional_08.PNG
iDirectional_09.PNG iDirectional_12.PNG
iDirectional_11.PNG iDirectional_10.PNG
iDirectional_07.PNG iDirectional_06.PNG

contact@wellcontrol.com.br

http://www.wellcontrol.com.br